ABTECH SAFETY ACCESS 사용자 설명서

{카테고리_이름} ABTECH SAFETY ACCESS에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ABTECH SAFETY ACCESS 2 페이지. Sit harness

ABTECH SAFETY ACCESS 사용자 설명서
Product Description
The access harness is designed to be as accessible as possible to users who need extra support than
offered by standard harnesses. The user sits in the harness once it has been fitted to them. The user
can then walk around or remain seated while using the harness. The harness has two attachment
points at the front. The user is secured in the harness by a waist strap, a chest strap and leg loops.
Product Scope of Use
The scope of the use of the harness is recreational. The harness maintains the static load of the user
(similar definition to 'work positioning'). No dynamic loads are applied to the harness.
Conformity Standards/Specifications
The harness has been tested to the relevant sections of EN1651: 1999 Paragliding equipment –
harnesses – safety requirements and strength test.
PRODUCT RECORD CARD
THIS DOCUMENT SHOULD BE ISSUED WITH AND KEPT FOR EACH ITEM OR SYSTEM
• Please see the product label details required below.
• Consult the User Guide for advice on inspection, maintenance, lifespan etc.
Product Label Definitions
1. Manufacturers name and contact details
2. Manufacturers product code
3. Date of manufacture
4. Read instructions supplied with product
5. Serial Number
1
Tel: +44(0)1244 837 050
2
Model: AB10 STD
Date of Manufacture: 09/2012
3
4
READ INSTRUCTIONS BEFORE USE
Production Quality Control System.
ISO9001:2015 Certificate number: 1203060
In conformance to Article 11 B of the PPE Directive
Satra Quality Assurance, Wyndham Way, Kettering, Northamptonshire NN16 8SD.
Tel: +44 (0)1536 410 000
MANUFACTURE DETAILS
PRODUCT CODE
FINAL INSPECTION PRIOR TO DESPATCH BY
5
Serial Number: XXXXXX
Fax: +44(0)1536 410 626
PRODUCT SERIAL NUMBER
DATE
ACCESS SIT HARNESS
A
E
D
C
PRODUCT CODE: ACCESS
FITTING & ADJUSTMENT
A. Disconnect all buckles and put arms
through the arm holes of the harness
vest.
B. Connect the leg buckles and tighten.
Pull straps backwards to tighten leg loops
(pull buckle straps forward to loosen).
C. Connect the waist belt buckles and
tighten.
D. Connect the chest strap buckle and
tighten.
E. Pull down shoulder straps to tighten
B
(pull up buckle straps to loosen).