DUDOFF G02-M1 설치 및 사용자 지침 매뉴얼 - 페이지 5

{카테고리_이름} DUDOFF G02-M1에 대한 설치 및 사용자 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DUDOFF G02-M1 12 페이지. Built-in gas hob

페이지 인쇄

INSTRUCTIONS FOR THE USER

Notice

- When the equipment is not working, always

check that the knobs are in the closing position

(see fig.1).

- If the flame should blow out accidentally, the safety

valve will automatically stop the gas supply, after

a few seconds. To restore operation, set the knob

to the lighting point (large flame, fig.1).

- While cooking with fat or oil, pay the utmost

attention as these substances can catch fire

when overheated.

CLEANING

Before any operation, disconnect the appliance

from the electric grid. Don't use a steam

cleaner for the cleaning the hob.

It is advisable to clean the appliance when it

is cold.

Glass platform and enamelled parts

The glass platform and all of the enamelled parts

must be washed with a sponge and soapy water

or with a light detergent.

Do not use abrasive or corrosive products.

Do not leave substances, such as lemon or tomato

juice, salt water, vinegar, coffee and milk on the

enamelled surfaces for a long time.

- Do not use sprays near the appliance in

operation.

- Do not place unstable or deformed pots on the

burner, so as to prevent them from overturning or

overflowing.

- Make sure that pot handles are placed properly.

- When the burner is started up, check that the

flame is regular and, before taking pots away,

always lower the flame or put it out.

Burners and racks

These parts can be removed to make cleaning

easier.

The burners must be washed with a sponge and

soapy water or with a light detergent, wiped well

and placed in their housing perfectly. Make sure

that the flame-dividing ducts are not clogged.

Check that the feeler of the safety valve and the

start-up electrode are always perfectly cleaned, so

as to ensure an optimum operation.

Gas taps

The possible lubrication of the taps must be carried

out by specialized personnel, exclusively.

In case of hardening or malfunctions in the gas

taps, apply to the Customer Service.