Dudoff London BB-Z01 설치 및 사용자 지침 매뉴얼 - 페이지 10
{카테고리_이름} Dudoff London BB-Z01에 대한 설치 및 사용자 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dudoff London BB-Z01 12 페이지. Built-in electric barbecue
페이지 인쇄Before carrying out maintenance of any kind,
disconnect the appliance from the mains. All
maintenance must be carried out by authorized
personnel only.
6) PART REPLACEMENT
To replace components located inside the
barbecue the resistance should be lifted up and
secured in the vertical position. Take out the drip
pan containing the lava stone and loosen the four
screws that are under it (see fig. 8). The work
surface can now be detached from the worktop
giving access to all internal components.
To reassemble the work surface of the appliance
take care not to damage the power cables and
Grill
TYPE OF
CABLE
Rubber
H05 RR-F
Policroroprene
H05 RN-F
Policroroprene
H07 RN-F
MAINTENANCE
ELECTRICAL COMPONENTS OUTPUT
Name
TYPE AND SECTION OF POWER CABLES
make certain that they are well positioned in the
guides along the side of the appliance.
Note: in the event the power cord is replaced,
the ground wire must be left longer than the
lead wires (B) (fig. 9) and the instructions in
the paragraph "ELECTRICAL CONNECTIONS"
must be observed.
To reassemble the appliance repeat the steps
above in the reverse order.
7) TECHNICAL SPECIFICATIONS OF
ELECTRICAL COMPONENTS
To facilitate the task of the installer a table with
component specifications is included below.
TOTAL OUTPUT
OF APPLIANCE
2400 W
2400 W
2400 W
FIG. 8
10
W
2400
SINGLE - PHASE
POWER SUPPLY
2
Section 3 x 1.5 mm
2
Section 3 x 1.5 mm
2
Section 3 x 1.5 mm