Anywhere Fireplace 90298 설치 지침 매뉴얼 - 페이지 4

{카테고리_이름} Anywhere Fireplace 90298에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Anywhere Fireplace 90298 6 페이지. Bio-ethanol fireplace

Step 6

Hang fireplace on the wall by placing the open slots on the

back of the fireplace onto the mounted brackets.

Insert glass panel into the slots located on the inner sides of the fireplace.

Step 9

Using the funnel provided, carefully pour in the liquid ethanol

fuel for fireplaces into the burner until it can be seen above the

perforated holes in the burner. If any fuel does spill, you should

always wipe it up prior to lighting your fireplace.

Step 11

The curved ends in the handle provided will fit into the holes in the lid of the burner. You can adjust the flame height to get the desired

flame height, heat output, and length of time fuel lasts. When you are ready to extinguish the fireplace, use the handle to slide the lid of the

burner completely closed over the opening to cut off the oxygen supply to the fuel. This will snuff out the flame. It may take a few seconds

to completely extinguish the flame.

Insert fuel tray into fireplace and cover fuel tray with the

provided lid.

Step 10

Be sure to use a long lighter or long match to light the fuel in

the burner and ENJOY! NEVER REFILL WHILE HOT. Wait

until it is cool to the touch before refilling.