Anywhere Fireplace SoHo 사용 설명서 - 페이지 3

{카테고리_이름} Anywhere Fireplace SoHo에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Anywhere Fireplace SoHo 6 페이지. Fireplace
Anywhere Fireplace SoHo에 대해서도 마찬가지입니다: 사용자 설명서 (4 페이지)

페이지 인쇄

MOUNTING INSTRUCTIONS

Use a level to mark a straight line with a pencil on the wall where you will mount the bracket. The wall should be made

from drywall, tile, brick, stone, ect. It must not be flammable (e.g. no wallpaper or wood) Make sure you mount the

fireplace at least 4 feet away from any drapes or flammable materials.

Mark bracket hole locations on the wall with a pencil keeping them level with the line previously drawn.

Step 2

Using a 3/8" drill bit, drill holes into the wall on the 4 spots where you marked the bracket hole locations.

Step 3

Insert the wall anchors flush into holes in wall as shown in step 3. A light tap with a hammer might be necessary to

insure it is inserted flush with the wall. If you drill a hole into a wooden stud, the wall anchor is not necessary.

NOTE: The wall anchors provided are intended to be used in drywall. If mounting on another wall surface, make sure

you have the proper mounting hardware.

Step 4

Place bracket over holes of anchors and attach to the wall by inserting anchor screw through the bracket into the anchors

in the wall. Repeat for all four screws.

Step 5

Using a screwdriver, attach wall spacers to the back of the fireplace in the predrilled holes using the spacer

screw. If they are already attached, insure it is on securely.