Concox GPS Vehicle tracker 사용자 설명서 - 페이지 7

{카테고리_이름} Concox GPS Vehicle tracker에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Concox GPS Vehicle tracker 16 페이지. Gps vehicle tracker (gps+gsm+sms/gprs)

to connect the ACC line; otherwise the device will enter ignition detection

status when disconnect the ACC line. If you don't need to anti-theft temporarily,

just connect the ACC line to the positive side in parallel.

3. Tele-cutoff (petrol/ electricity) control line (yellow) is connected to pin 86 of

the Tele-cutoff (petrol/ electricity) relay (equal to the yellow line of the relay

socket).

4. USB cable (3 pin)

Firmware updating interface/expanded function to reserve space.

5. MIC line (2 pin)

Externally connect to microphone for voice monitoring function.

6. SOS line (2 pin)

Externally connect to SOS switch for SOS function.

5. Quick Operation Instructions

Operation Tips: To properly use the device, common parameters should be set

before initial use. This can be done by using the parameter editor or by

sending SMS commands to the device. (","should be English comma and no

space before and after the comma)

5.1 APN setting

To connect default platform http://www.gpsyeah.com, please send the SMS

command below:APN command format:

APN,APN's Name#

E.g: APN,internet# ("internet" is the APN of carrier)

The device will reply "OK" if setting successfully.

Note: The APN of some countries have user name and password, you may

need to send SMS command as following:

APN,APN name,user name,password#

E.g: APN,internet,CLIENTE,AMENA#

5.2 DNS setting

To connect other platform, please send the two SMS commands bleow:

Command format：

①APN,APN's Name#

②SERVER,1,DNS,Port,0#

E.g: