Concrete Tool Importers surspider ZKZ-25A 소유자 매뉴얼 - 페이지 6
{카테고리_이름} Concrete Tool Importers surspider ZKZ-25A에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Concrete Tool Importers surspider ZKZ-25A 12 페이지. Intelligent rebar tier
페이지 인쇄
Battery Charger
230/240V 50Hz Power Plug Socket
Charging stations
Battery charging indicator lights
To adjust the power levels
To adjust the tension on the tie you can adjust the power level with the
rotary dial.
1. Turn the rotary dial to the power level that you require, normally level 3
should be correct.
If the knot is not tight enough you may need to increase the power.
If the wire breaks you may need to reduce the power
9.
Concrete Tool Importers Ltd
0800 727 333
Wire Roll Installation
Cover
Wire feed receiver
Open Cover
Tapered Sleeve
Push & hold
Wire
Clutch release
1. Press "Unlock Button"
2. Put wire roll into the gun
3. Press the ""Clutch Release" and insert the wire into the
wire feed receiver
4. Close both of the covers and press the locking button
Wire Coil
Diameter (mm)
Length (m)
Net Weight (g)
Ties per roll ZKZ-25A
Ties per roll ZKZ-40A
Concrete Tool Importers Ltd
Wire Roll
Locking Button
Unlocking Button
0.8
100
390
283
147
0800 727 333
10