Duerkopp Adler 271 사용 설명서 - 페이지 10

{카테고리_이름} Duerkopp Adler 271에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Duerkopp Adler 271 18 페이지. Preface and general safety notes
Duerkopp Adler 271에 대해서도 마찬가지입니다: 피팅 지침 (2 페이지)

페이지 인쇄

2.2. Elements on the Frame

Elements

1Main Switch

2Pedal

Maintenance unit

6Air filter and

7Water seperator

4Pressure regulator

9Oil Mister

Function

–

Turn the sewing drive on and off.

The sewing machine head is operational.

Attention!

For threading, replacement of sewing tools (such as

needle, pressure foot, needle plate, material feed etc.),

cleaning, when leaving the work place as well as during

maintenance work it is essential to turn the main switch

off.

See also General Safety Notes.

–

A Rest position. No function.

B Raise pressure foot during machine rest

C Sewing to a maximum number of stitches by

appropriate step down.

D Seam bartacking* - Thread cutting - Raise

pressure foot*

*Not with sub-classes -....41

–

Before the water level reaches the air filter 6 screw

in screw 8 and relaese the water under pressure.

–

For setting the air pressure at 6 bar pull up and

adjust the knob 4.

Turn to the right = Pressure increase

Turn to the left = Pressure decrease

–

The oil mister provides the solenoid valves and

cylinders with lubricating oil .

With the regulating screw 11 set at approx. 1 drop of

oil for 15 work cycles.

To fill the mister 9 turn off the compressed air. Do

this by pulling up the knob 4 and turning to the left.

Screw out screw 10 and fill Esso SP - NK 10 oil up to

the grooved marking of the oil reservoir.