Addi-Data CPCIs-1711 기능 설명 - 페이지 6

{카테고리_이름} Addi-Data CPCIs-1711에 대한 기능 설명을 온라인으로 검색하거나 PDF를 다운로드하세요. Addi-Data CPCIs-1711 17 페이지. Multifunction counter board, optically isolated
Addi-Data CPCIs-1711에 대해서도 마찬가지입니다: 기능 설명 (15 페이지)

페이지 인쇄
Addi-Data CPCIs-1711 기능 설명

Function description

1 Function description
Via the 50-pin header, TTL signals can be connected to the board.
Signals PA0 to PA7, PB0 to PB7 and PC0 to PC7 are connected in parallel to all four function modules of
the board. To avoid malfunction, the "TTL I/O" function can be loaded only in one function module.
Features:
•
For each function module 3 ports (A, B, C) with 8 digital inputs/outputs each (set as inputs after the
reset)
•
For each function module 1 Port (D) with 2 digital inputs/outputs (set as outputs after the reset)

1.1 Board versions with "TTL I/O" function

The I/O specifications of the different board versions are available in the Technical Description of the
APCIe-/CPCIs-1711 or APCI-/CPCI-1710 (see PDF links).
www.addi-data.com
NOTICE!
In case other signals are connected, these have to correspond to
the TTL level to prevent the board from being damaged.
Please also note that the ports are not optically isolated and that
the board may be destroyed due to external voltage peaks!
NOTICE!
The "TTL I/O" function can be used with every version of the
APCIe-1711, CPCIs-1711 or APCI-1710.
6
TTL I/O