Duerkopp Adler 506 사용 설명서 - 페이지 6

{카테고리_이름} Duerkopp Adler 506에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Duerkopp Adler 506 17 페이지.
Duerkopp Adler 506에 대해서도 마찬가지입니다: 설치 지침 매뉴얼 (8 페이지)

–

For a secure sewing-on draw the thread end hanging out of the

needle taut to the side when starting the first sewing sequence

and hold tight.

After the first stitches the thread can be released again.

–

The automatic sewing sequence runs through according to the

selected sewing program (P01 - P03).

For an exact description of the different sewing programs see Part

4 "Short Description Multicontrol".

–

After the sewing sequence ends the clamps are raised

automatically.

–

Remove the sewing material.

Quick stop

The safety system of the 506 has two different options for the

immediate shut-off of the unit by operator error, needle breakage,

thread breakage etc.:

–

Pressing the Stop key 1 on the front panel of the controls.

The sewing sequence is interrupted.

The thread lever moves to the high position.

–

Pressing the Stop key 2 on the head cover.

The sewing sequence is interrupted.

The thread lever moves to the high position.

To continue the sewing sequence:

–

Operate the left foot switch.