Duerkopp Adler 550-16-26 사용 설명서 - 페이지 12

{카테고리_이름} Duerkopp Adler 550-16-26에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Duerkopp Adler 550-16-26 12 페이지. Sewing lamp led
Duerkopp Adler 550-16-26에 대해서도 마찬가지입니다: 피팅 지침 (2 페이지), 사용 설명서 (19 페이지)

페이지 인쇄

7. Sewing Test

Following the installation work, carry out a sewing test.

–

Insert the mains plug.

Caution Risk of Injury!

Switch off the main switch.

Switch off the sewing machine before threading the needle and the

hook thread.

–

Thread the reel thread (See Operating Instructions).

–

Switch on the main switch.

–

Arrest the sewing feet in raised position (See Operating

Instructions).

–

Fill up the reel at low speed.

–

Switch on the main switch .

–

Threading the needle and hook thread (See Operating

Instructions).

–

Select the material to be sewn.

–

Start the sewing test at low speed and increase the

speed continuously.

–

Check whether the seam meets the expectations.

If the expectations are not fulfilled change the thread tensions

(See Operating instructions).

If necessary, check and correct the settings

specified in the Service Instructions.