Addi-Data MSX-E3701 빠른 설치 - 페이지 8

{카테고리_이름} Addi-Data MSX-E3701에 대한 빠른 설치을 온라인으로 검색하거나 PDF를 다운로드하세요. Addi-Data MSX-E3701 8 페이지. Ethernet system for length measurement

- Transducer Database: Edit the user's transducer database, that is, for example, change

transducer features and add new transducers. The MSX-E database must contain the

transducers that will be connected to the MSX-E system in order for the system to

detect them.

- Firmware Update: Update the firmware of the MSX-E system. The required firmware

file is available on the ADDI-DATA website under "Download / Driver download".

The name of the downloaded file corresponds to the firmware version.

- Transducer Calibration: Calibrate transducers connected to one or more channels.

- Transducer Diagnosis: Test transducers for errors (short-circuit, open load).

- Transducer Monitoring: Select the channels to be acquired and start the acquisition

with monitoring. For each channel, each acquired value is immediately displayed in a

diagram.

NOTICE!

Depending on the Ethernet system, a different number of buttons

and accordingly, different types of actions are available.

Web interface: Quick access to the MSX-E system

From the web interface of your MSX-E system, you can access the system quickly and

manage your functions conveniently without programming.

To open the web interface of your MSX-E system, proceed as follows:

- Open a web browser (such as Mozilla Firefox, Internet Explorer, etc.) and enter the

following address: http://IP address of the Ethernet system.

A login window is displayed.

- Enter "mxadmin" as the user name and password.

Please find further information on our website:

www.addi-data.com.

Do not hesitate to call us or to send us an e-mail

(see front page for contact data).