Duerkopp Adler 550-767 설치 지침 매뉴얼 - 페이지 8

{카테고리_이름} Duerkopp Adler 550-767에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Duerkopp Adler 550-767 18 페이지. Engineered work station for side airbag tearing seam
Duerkopp Adler 550-767에 대해서도 마찬가지입니다: 피팅 지침 (2 페이지)

페이지 인쇄

2.3 Transport within customer premises

2.4 V-belt tension

For internal transport the sewing machine and the control unit (PC)

must be lifted and moved by a suitable vehicle (e.g. a fork-lift).

All connections between the sewing machine and the control unit

should be undone if appropriate.

After the machine has been moved the pre-set V-belt tension must be

checked.

The tension in the V-belt 1 must be such that it can be depressed by

approx. 10 mm by applying finger pressure in the middle.

–

Loosen nuts 2 and 3

–

Swivel drive until V-belt tension is correct.

–

Retighten nuts 2 and 3.