Duerkopp Adler 559 설치 지침 매뉴얼 - 페이지 8

{카테고리_이름} Duerkopp Adler 559에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Duerkopp Adler 559 20 페이지. Automatic single-chainstitch eyelet machine

Table top with dimensioning

If you manufacture the table top yourself, take the above sketch as an

example for the dimensioning. The table top should be approx. 40 mm

thick.

Hole for the thread stand

Positions for screwing on the brackets. To fasten the machine

safely, use only the screwed inserts M8 x 25 DIN 7965 (the screwed

inserts are not included in the accessories) with the screws for the

brackets.

Positions for screwing on the protective bracket for the control

Positions for screwing on the control

The rubber-bonded metal buffers 5 have to be screwed between the

brackets 7 and the machine pedestal, because otherwise vibrations are

transmitted from the automat to the stand (all required parts are

included in the accessories).