Duerkopp Adler 577-1111 설치 지침 매뉴얼 - 페이지 10

{카테고리_이름} Duerkopp Adler 577-1111에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Duerkopp Adler 577-1111 19 페이지.

5.4

Adjusting and connecting the pedal

Stand set for longitudinal installation and stand set for

transversal installation

–

Adjust the pedal 1 on the stand strut 2 sideways so that the middle

of the pedal stands more or less under the middle of the needle.

–

Screw the pedal 1 to the stand strut.

Stand set for transversal/longitudinal operation

When using this stand set, the pedal can be adapted to the different

working positions as follows:

–

Lift the ball handle 3.

–

Turn the pedal platform 4 according to the working position and let

the ball handle 3 engage in the end position.

For all stand sets

–

Screw set point generator 5 to the stand.

–

Introduce the plug of the set point generator 5 into the bush 6 of

the control box.

–

Suspend the pedal rods 7 in the set point generator 5.

–

Loosen slightly the clamping screw 8.

–

Adjust the pedal rods so that the released pedal 1 has an

inclination of about. 10°.

–

Tighten the clamping screw.