Duerkopp Adler 579 설치 지침 매뉴얼 - 페이지 7

{카테고리_이름} Duerkopp Adler 579에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Duerkopp Adler 579 9 페이지.

Pneumatic connection

5.1

Connecting the maintenance unit

5.2

The pneumatic system of the machine and its auxiliary equipment must

be supplied with compressed air containing absolutely no water or oil.

CAUTION:

For the pneumatic control processes to function properly the

compressed-air supply must be able to provide air at a pressure

of 6 ± 0.5 bar.

The compressed-air should be clean (oil-free).

Pneumatic connection pack

A pneumatic connection pack (item no. 0797 003031) is available for

frames with compressed-air maintenance units.

It contains the following components:

5-metre connection hose (Ø = 9 mm)

–

hose nozzles and ties

–

R 1/4" plug-and-socket connector with cover

–

The machine's operating pressure is 6 bar.

It can be read off at the pressure gauge 2.

To adjust the operating pressure pull up and rotate the handle 2:

–

Clockwise

Anti-clockwise

= to increase pressure

= to decrease pressure.