Anztec PS 200 설치 및 운영 매뉴얼 - 페이지 3

{카테고리_이름} Anztec PS 200에 대한 설치 및 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Anztec PS 200 6 페이지.

Anztec PS200 Installation/Operating Guide V1.2

Functionality and pin numbers are also detailed on the enclosure decal as shown below:

The diagram on the following page shows a typical installation with a Prowash manual bay timer,

Microcoin QL coin mech and Nayax VPOS card terminal. Note that 24VAC COMMON is looped into

one side of the output relay as the Prowash timer requires pulses of 24VAC COMMON to signal

credit pulses on the coin input. Note that it may be necessary to loop 24VAC HOT, +12VDC or -

12VDC through the output relay depending on the specific requirements of the timer being

interfaced to.

The red LED indicates that the 12VDC output is operational.