Duerkopp Adler 745-23 설치 지침 및 교체 부품 목록 - 페이지 6

{카테고리_이름} Duerkopp Adler 745-23에 대한 설치 지침 및 교체 부품 목록을 온라인으로 검색하거나 PDF를 다운로드하세요. Duerkopp Adler 745-23 14 페이지.

3. Attaching the Machine Parts Removed for Shipment

Sewing units for jacket fabrication are equipped with only one pedal.

Those equipped for trouser fabrication have a left and a right pedal.

The pedal 3 is to be attached at the lower cross spar 4:

–

Attach pedal 3 with the angle 5 on the lower cross spar 4.

The slots in angle 5 make possible an adaption to different work

heights.

Align the height of angle 5 so that pedal 3 can be optimally

operated.

–

Hook in the pedal bar 2.

–

Loosen clamping screw 1 slightly.

–

Set the height of the pedal bar 2 so that the pedal is horizontal

when stepped down to the stop.

–

Tighten clamping screw 1.