Duerkopp Adler 745-24 설치 지침 및 교체 부품 목록 - 페이지 7

{카테고리_이름} Duerkopp Adler 745-24에 대한 설치 지침 및 교체 부품 목록을 온라인으로 검색하거나 PDF를 다운로드하세요. Duerkopp Adler 745-24 14 페이지.

3.2 Yarn Stand

–

Place the yarn stand 1 in the drilled hole 2 of the housing and

attach with nuts and washers.

–

Mount and align the yarn plates and take-off arms as shown in the

illustration.

–

Insert the folder 8 with block 7 up to the stop on the accepting bolt

of the clamping piece 3.

Pin 5 must catch in the slot 6.

–

Tighten clamping screw 4.

This results in the factory setting.