Duerkopp Adler 745-26 설치 지침 매뉴얼 - 페이지 18

{카테고리_이름} Duerkopp Adler 745-26에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Duerkopp Adler 745-26 18 페이지.

7. Starting up

<==== REF

–

Turn on main switch.

Control is initialised.

The DÜRKOPP-ADLER logo briefly appears in the operating-panel

display.

–

The control unit checks whether the carriage is in its rearmost

position.

If not, "<====REF" (reference travel) appears in the display.

–

Depress left-hand pedal.

Reference travel commences.

The carriage moves to its rearmost position.

Reference travel is necessary to ensure that the carriage is always

in its defined starting position.

–

The display changes to the sewing-machine main screen.

–

By operating the appropriate pedals the various placement stages

are activated in sequence and sewing is commenced.

The individual stages depend on the working method and on the

configuration of the machine.

Attention!

At the commencement of sewing the material must be beneath the

feeding clamps.

Moving the carriage without material damages the covering of the

feeding clamps.

–

For the choice of sewing program and further control-unit

adjustment see part 4 ("DAC 745-26/-28: brief description").

–

Placement and operation are described in part 1 ("745-26/-28:

operating instructions").