Duerkopp Adler 745-28 설치 지침 매뉴얼 - 페이지 13

{카테고리_이름} Duerkopp Adler 745-28에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Duerkopp Adler 745-28 18 페이지.

4. Electrical connection

Attention!

All work on the electrical equipment of the sewing machine must be

carried out by specialist electricians or other appropriately-trained

persons.

The mains plug must be removed.

The DAC operating panel 1 is mounted on the right-hand side of the

machine, seen from the operator's viewpoint.

–

Fit operating panel 1 with clamps 4 and 6 to attachment bracket 5

and adjust angle.

–

Firmly tighten clamping screws on clamps 4 and 6.

Attach potential cable 3 to clamp 4.

The function of the potential cable is to discharge static charges to

earth.

–

Slightly undo lock nut 7 on attachment bracket 5.

–

Rotate operating panel 1 until the operator has the best possible

view of the display.

–

Firmly tighten lock nut 7.

–

Carefully insert plug 2 into the back of the operating panel.

–

Tighten screws of plug 2.