Duerkopp Adler 911 피팅 지침 매뉴얼 - 페이지 17

{카테고리_이름} Duerkopp Adler 911에 대한 피팅 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Duerkopp Adler 911 20 페이지. Laser lamp
Duerkopp Adler 911에 대해서도 마찬가지입니다: 피팅 지침 매뉴얼 (16 페이지), 피팅 지침 매뉴얼 (8 페이지), 피팅 지침 매뉴얼 (16 페이지)

페이지 인쇄

Fitting Instruction for Remaining Thread Monitor

Operating

3.1 Winding on the bobbin thread

3.2 Activating the residual thread monitor

Ausgabe/Edition:

Änderungsindex

03.2011

Rev. index: 00.0

Anbauanleitung Restfadenwächter

Teilesatz 0911 597754

Kit 0911 597754

–

The residual tread monitor bobbins have to be inserted for

winding on with the groove A pointing towards the winder, so

that the groove A is not visible.

–

The thread has to be wound on into the small bobbin segment

first.

–

The bobbin has to be inserted in the hook with the groove A

pointing downwards!

(Also see the operating manual chapter 7.7.4: Edit the machine

parameters)

–

Select "MP1 – Configuration" in "Machine parameters".

–

Then select "Options" (MP1.4) and activate the bobbin thread

monitor.

Printed in Germany

Teile-Nr./ Part-No.:

0791 911703

Blatt:

von

Sheet: 17 from 20