Anzzi SH-AZ101BN 설치 및 운영 매뉴얼 - 페이지 7
{카테고리_이름} Anzzi SH-AZ101BN에 대한 설치 및 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Anzzi SH-AZ101BN 12 페이지. Rainfall shower bar
페이지 인쇄INSTALLATION
7
a.
anchor
b.
8
rod
[11]
[09]
nut
r
a.
[11]
screw
cap
c.
b.
[01]
STEP 7:
a. Drill the holes for the Mounting Kit [11]
using a 1/4" (6 mm) bit.
b. Install the anchors.
c. Secure the Mounting Kit [11] with
screws.
d. Make sure the screw holes are aligned
vertically.
e. Slide the cap to the Mounting Kit [11].
STEP 8:
a. Install the Faucet [01]
Riser [09]. Push the rod into the hole of
the Mounting Kit [11]. Hand tighten the
nuts and secure with wrench.
Do not over tighten.
Note:
Put a thin cloth between the nut
and the wrench to avoid scratching.
b. Make sure the Riser [09] is vertical.
c. Secure the rod of Riser [09] by tighten
the screws.
filters and
PG. 5