Duerkopp Adler Tape Feeder 액세서리 매뉴얼 - 페이지 10

{카테고리_이름} Duerkopp Adler Tape Feeder에 대한 액세서리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Duerkopp Adler Tape Feeder 12 페이지. Fitting instructions tape feeder kit 0176 590034

페이지 인쇄

3.4 Setting the adjustment ring of the reinforcement tape roller support

3.5 Setting the brake for the reinforcement tape

Ausgabe/Edition:

Änderungsindex

01.2009

Rev. index: 00.0

Anbauanleitung Bandzuführung

für Teilesatz 0176 590034

Fitting Instructions Tape Feeder

Kit 0176 590034

The reinforcement tape roller 5 should be aligned centred to the

reinforcement tape guide and the needle.

–

Remove the brake cone 3 from the rod 2.

–

Shift the roller 5 on the rod 2.

–

Shift the brake cone 3 on the rod.

–

Align the roller 5 to be centred to the guide 6.

–

Fasten the cone 1 on the right.

–

Shift the brske cone 3 on the left against the roll and fasten it.

The reinforcement tape roller should no longer be in motion after the

ending of the sewing process.

At the same time the reinforcement tape roller should not brake

intensely, otherwise a warp on the sewing material may occur.

–

Set the brake 4 on the left brake cone 3 accordingly.

Printed in Germany

Teile-Nr./ Part-No.:

0791 176701

Blatt:

10 von 12

Sheet: 10 from 12