Duerkopp Adler 0791 911701 피팅 지침 매뉴얼 - 페이지 10
{카테고리_이름} Duerkopp Adler 0791 911701에 대한 피팅 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Duerkopp Adler 0791 911701 16 페이지. Laser lamp
페이지 인쇄
2.2 Kit 0510 590034 "Laser additional lamp complete"
Quantity
Material-No.
1
9835 501004
1
0806 402670
1
0806 402680
3
0216 000103
3
Mounting the kit
3.1 Mounting the plate for the power supply units
2
Ausgabe/Edition:
Änderungsindex
05.2010
Rev. index: 00.0
Anbauanleitung für Laserleuchte
Teilesatz 0911 597524
Fitting Instruction for laser lamp
Kit 0911 597524
With each power supply unit up to 2 additional laser lamps can be
connected. The three laser lamps are then connected as a group.
To this end the kit 0510 590034 "Laser additional lamp complete"
is available.
The kit consists of the following components:
Designation
Laser complete
Clamp (on bow 0510 491010)
Clamp (in clamp 0806 402670)
Hexagonal nut M10 x 1 (1x lock clamp 1 on bow;
1x lock clamp 2 on clamp 1; 1x lock laser
on clamp 2).
Caution: Risk of injury!
Turn the main switch off!
Mount the kit only with the sewing unit switched off!
1
–
Unscrew the cover 1 and 2.
–
Unscrew the PCB 3 from the plate 4.
4
Printed in Germany
Teile-Nr./ Part-No.:
0791 911701
3
Blatt:
von
Sheet: 10 from 16