Duerkopp Adler 911 피팅 지침 매뉴얼 - 페이지 12
{카테고리_이름} Duerkopp Adler 911에 대한 피팅 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Duerkopp Adler 911 20 페이지. Laser lamp
Duerkopp Adler 911에 대해서도 마찬가지입니다: 피팅 지침 매뉴얼 (16 페이지), 피팅 지침 매뉴얼 (8 페이지), 피팅 지침 매뉴얼 (16 페이지)
페이지 인쇄
Fitting Instruction for Remaining Thread Monitor
2
Mounting the bobbin thread monitor (RFW)
2.1
Mounting the light barrier
Ausgabe/Edition:
Änderungsindex
03.2011
Rev. index: 00.0
Anbauanleitung Restfadenwächter
Teilesatz 0911 597754
Kit 0911 597754
–
Attach the pre-assembled carrier 2 by using screw 1.
–
Position the light barrier so that its light beam points through
the slit on the bobbin case onto the reflecting surface on the
bobbin and back to the light barrier.
Note:
In general the front edge of the light barrier device has to come
parallel with the front edge of the carrier 2.
–
Connect the hose 3 for the compressed air.
2
1
Printed in Germany
Teile-Nr./ Part-No.:
0791 911703
3
Blatt:
von
Sheet: 12 from 20