2connect 2C-POS80-02 사용자 설명서 - 페이지 15

{카테고리_이름} 2connect 2C-POS80-02에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. 2connect 2C-POS80-02 17 페이지. Pos thermal receipt printer

2.9 Enter the program upgrade mode

When printer is power off,open paper case cover. Hold the【FEED】button, then

switch on the printer and release the【FEED】 when the status indicator and paper-out

indicator flash alternately. Then press the 【FEED】for five times ( RS232 and USB

interface support, Ethernet adopts the web page mode to upgrade directly) and close

the paper cover, printer enter the program upgrade mode. At this time, the status

indicator flash once a second.

Quick enter method:

Open the paper case cover firstly when printer is power off. Hold the 【FEED】button

and switch on the printer, then release the 【FEED】button quickly, then printer enter

the program upgrade mode. At this time, the status indicator flash once a second.

Notice:

1. When printer enter the program upgrade mode, the paper-out indicator flash

means the interface can't be upgraded.

Appendix A

This appendix is the method to set the printer parameter according to button

operation.

Setting introduction: Press【Paper cover】button to choose setting,when press it

once , the set become the next one and it will print the present set value; use【FEED】

button to set the set value, when press it once , the set become the next one and it

will print the present set value.