Duevi EZY-LAN 매뉴얼 - 페이지 12
{카테고리_이름} Duevi EZY-LAN에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Duevi EZY-LAN 12 페이지. Wireless alarm panel with ethernet + wi-fi + gsm + lte
Duevi EZY-LAN에 대해서도 마찬가지입니다: 사용자 설명서 (4 페이지), 사용자 설명서 (5 페이지)
페이지 인쇄14 Reset to factory conditions
To restore the control panel to factory conditions
carry out the following procedure:
1. Turn off the control panel (see paragraph
Turning off)
2. With the control panel off, long press the PWR
button (8), the led ring starts flashing white
and violet
3. Continue to hold down the PWR button (8) and
at the same time press briefly the central
button (5) within 5 seconds
4. Release the PWR button (8)
5. The
control
panel
conditions and restarts
15 Warnings and Precautions
•
The installer is required to follow the
regulations
in
declines all responsibility in case of improper
use by the user or incorrect installation by the
installer.
•
Handle the battery carefully. Danger of
explosion and fire. Do not throw the battery
into fire, do not weld or damage the battery.
Replace the battery only and exclusively with
an identical one. Have the battery replaced by
a specialized technician.
•
Dispose of exhausted batteries according to
the regulations in force, even if the equipment
is decommissioned. In the event of liquid
spillage, protect your hands with special
gloves.
restores
the
force.
The
manufacturer
factory
EU DECLARATION OF CONFORMITY
Hereby, DUEVI declares that the radio equipment
type "Wireless alarm control panel with Ethernet /
Wi-Fi / GSM / LTE connection" mod. EZY-LAN is in
compliance with Directive RED 2014/53/EU.
The full text of the EU Declaration of Conformity is
available at the internet address www.duevi.eu
DUEVI SRL
Via Bard 12/A – 10142 Torino
MADE IN ITALY