Duevi EZY-LAN 사용자 설명서 - 페이지 5
{카테고리_이름} Duevi EZY-LAN에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Duevi EZY-LAN 5 페이지. Wireless alarm panel with ethernet + wi-fi + gsm + lte
Duevi EZY-LAN에 대해서도 마찬가지입니다: 매뉴얼 (12 페이지), 사용자 설명서 (4 페이지)
10 Using SMS Messages
The control unit can be controlled by sending
simple SMS messages.
The control unit must have an active SIM card
connected to the telephone carrier.
SMS messages can be sent using the DUEVI
ALARM PRO app, available for IOS and Android
systems in the respective stores.
Each SMS must begin with a user code,
which uniquely identifies the user and his
authorisations in the control panel.
xxxxxx.<command>
where xxxxxx = 6-digit user code
Commands will be executed by the control
panel only if the user is enabled to
execute them.
The control panel accepts SMS commands
from any telephone number and responds
with a confirmation or error text message
SMS commands have a precise syntax
which must be respected!
Do not enter spaces or other characters
other than those indicated below.
10.1 Request system status
xxxxxx.status
The control panel responds with an SMS
containing the status of the sectors associated
with the user.
10.2 Total arm
xxxxxx.arm
The control panel arms all sectors associated
with the user.
10.3 Individual sectors arm
xxxxxx.arm.Y.Y.Y.Y
Y= number of the individual sector to arm
Examples:
arm.1.3.5
arm.2
The control panel arms the individual sectors
indicated only if they are associated with the
user.
10.4 Total disarm
xxxxxx.disarm
The control panel disarms all sectors associated
with the user.
arm sectors 1+3+5
arm sector 2
10.5 Individual sectors disarm
xxxxxx.disarm.Y.Y.Y.Y
Y= number of the individual sector to disarm
Examples:
disarm.1.2.6
disarm.4
The control panel arms the individual sectors
indicated only if they are associated with the
user.
10.6 Enabling installer access
xxxxxx.installer.on
The control panel enables installer access.
10.7 Disabling installer access
xxxxxx.installer.off
The control panel disables installer access.
10.8 SIM Data Activation
xxxxxx.apn.Y
Y= apn address for internet access
Examples:
apn.mobile.vodafone.it
The control panel sets the indicated apn address
and enables the SIM data connection.
10.9 GSM Status Request
xxxxxx.statusgsm
The control panel responds with an SMS
containing GSM status, carrier name and signal
level.
10.10 GSM module reboot
xxxxxx.rebootgsm
The control panel performs a reboot of the GSM
telephone module.
10.11 Control panel reboot
xxxxxx.reboot
The control panel performs a complete reboot.
disarm sectors 1+2+6
disarm sector 4
enable data for
italian Vodafone SIM