Duevi PEPEROSSO 설치 및 사용 설명서 - 페이지 5

{카테고리_이름} Duevi PEPEROSSO에 대한 설치 및 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Duevi PEPEROSSO 19 페이지. Dissuader with nebulization irritating gas

Functioning

The electronic board analyses the wired input commands to safely determine the need for spray. In positive

case, a mechanical system compress the sprays that nebulize the chili pepper based gas.

The active principle will spread in an area of about 100 m

and mucosa, cough, lacrimation, heavy abundance of mucus and intense burning sensation, persuading

the intruder to leave immediately the area.

Peperosso can work in two different modes to avoid unwanted nebulization:

THE SECURITY SYSTEM MUST BE ARMED...



Peperosso is connected to control panel (input IN1) and enable its working only when the alarm

system is armed

...IN CASE OF ALARM NEBULISATION IS READY...



When the system is in alarm the control panel signals it to Peperosso (input IN2) that prepares

nebulisation: the gas is not yet emitted, depends on input IN3 state

...AN INTRUDER CAUSE NEBULISATION TO START



Peperosso verify if the confirm input (input IN3) signals a detection: it's the confirm an intruder is

near and thus gas nebulisation can start

It's possible to connect input IN3 to a remote control system (example: surveillance system) to

enable nebulisation from remote

THE SECURITY SYSTEM MUST BE ARMED...



Peperosso is connected to control panel (input IN1) and enable its working only when the alarm

system is armed

...AS SOON AS AN ALARM STARTS THE GAS IS NEBULIZED



When the system is in alarm, the control panel signals it to Peperosso (input IN2) that prepares

nebulisation: the gas is nebulized. The confirm input (input IN3) must be correctly connected

(unique environment), causing irritation on skin