Anzzi ENVO WH-AZ035-M1 설치 및 운영 매뉴얼 - 페이지 11

{카테고리_이름} Anzzi ENVO WH-AZ035-M1에 대한 설치 및 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Anzzi ENVO WH-AZ035-M1 16 페이지. Electric instant water heater

INSTALLATION

Step 1:

1. Mark two screw hole locations on the wall where the water heater is going to be placed.

Make sure both holes are vertical and 5.75" (146mm) apart if installing the heater with the

outlet and inlet pointed downward or 5.47" (139mm) if the outlet and inlet pointed upwards.

2. If screw locations are in wall stud, drive mounting screws directly into stud. if screw

locations are not in stud. Drilling two 0.24''(6mm) diameter holes on the wall. Insert the

plastic anchors into the holes and then drive screws into wall anchor.

Step 2:

Heater with the outlet and inlet pointed

downward:

1. Place water heater on wall and slide

onto mounting slot.

2. Secure water heater to wall with screw

through safety tab.

3. Ensure water heater is level and secure

on wall. (Fig 4)

Heater with the outlet and inlet pointed

upward:

1. Place water heater on wall and slide

onto mounting slot.

2. Secure water heater to wall with screw

through safety tab.

3. Ensure water heater is level and secure

on wall. (Fig 5)

Fig 3

Screw mounting Slot

Safety Tab

Screw mounting Slot

Fig 4

Fig 5

PG.7