Aobosi ZM1507A 사용 설명서 - 페이지 4

{카테고리_이름} Aobosi ZM1507A에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Aobosi ZM1507A 17 페이지. Slow juicer

6.DO NOT MOISTEN THE BASE OR SPLASH WATER ON THE BASE.

Be careful not to let any liquids or other substances get into the switch on

the appliance. DO NOT OPERATE THE SWITCH WITH WET HANDS.It may

CauSe electric shock or a ﬁre.

7.WHEN THE POWER CORD, WIRE IS BROKEN OR DAMAGED OR THE

PLUG-IN.PART BECOMES LOOSE, DO NOT OPERATE IT.

It may cause an electric shock, a ﬁre or an injury

8.FOR SAFETY, MUST DO GROUND CONNECTION DO NOT DO THE

GROUNDING.ON GAS PIPE, PLASTIC WATER PIPE, TELEPHONE WIRE, ETC.

It could cause an electric shock, a ﬁre, or a malfunction and an explosion.Be

sure to use the socket with ground connection.

9.NEVER DISASSEMBLE BOWL SET DURING OPERATION OR INSERT

FINGERS,FOREIGN OBJECTS SUCH AS FORKS,SPOONS ETC. INTO

FEEDING TUBE OR JUICE OUTLET.

It may cause an injury, an accident or a failure.Never replace the spiral

pusher with any other objects or have eyes get dose to the feed port,

otherwise accidents may happen.

10.THIS APPLIANCE IS NOT INTENDED FOR USE BY PERSONS INCLUD-

ING CHILDREN) WITH REDUCED PHYSICAL, SENSORY OR MENTAL

CAPABILITIES,OR LACK OF EXPERIENCE AND KNOWL EDGE, UNLESS

THEY HAVE BEEN GIVEN SUPERVISION OR INSTRUCTION CONCERN-

ING USE OF THE APPLIANCE BY A PERSON RESPONSIBLE FOR THEIR

SAFETY.

Children should be supervised to ensure that they do not play with the

appliance.Children are not allowed to clean and perform user mainte-

nance without supervision.

11.DO NOT OPERATE WITHOUT LOCKING THE HOPPER PROPERLY.

It may cause an injury or a failure.

12.IF A GAS LEAK IS DETECTED, DO NOT PLUG IN THE APPLI ANCE'S

POWER CORD INTO A POWER OUTLET IMMEDIATELY VENTILATE THE

ROOM BY OPENING A WINDOW, AND ALLOW TO FULLY VENTILATE

BEFORE PLUGGING IN THE APPLIANCE.

It may cause an injury or a failure.

13.IF SCREW ROTATION IS STOPPED IN NORMAL OPERATION, PRESS

IRI BUTTON AND HOLD FOR 3 SECONDS AND THEN AFTER REVERSE

OPERATION IS COMPLETELY STOPPED, PRESS IONI BUTTON AGAIN.

If such a stop event continues during the operation, the parts may be

damaged and performance may be deteriorated due to overheating in a

motor. When the problem continues, immediately stop the appliance and

contact the local Customer Care Center.