Aobosi YSV-803 매뉴얼 북 - 페이지 12

{카테고리_이름} Aobosi YSV-803에 대한 매뉴얼 북을 온라인으로 검색하거나 PDF를 다운로드하세요. Aobosi YSV-803 16 페이지. Sous vide circulator

CARE & MAINTENANCE

Rust removal should be carried out every month if the circulator is frequently used.

Cleaning should be performed more frequently in areas where hard water is used.

1.Put the appliance in a pot and fill the pot with water to the "Max" level indicated on appliance.

2. Set the appliance temperature to 158 °F (70℃).

3. Add 5g of citric acid powder (Food grade) per liter of water used.

4. Allow the water to circulate for 20 minutes after 158 °F (70℃) is reached.

5. Turn off and unplug the appliance.

6. When appliance is cool, rinse the bottom in the cold water and dry before storage.

NOTE:

•

Always turn off and unplug the unit.

•

Internal service work must be performed by certified personnel only.

•

Make sure system is at room temperature.

•

Check for signs of damage including pulled cord or physical damage to system or heaters. If any

signs of physical damage are found, please contact customer service and Repair Centre.