Cascade CPCY4201 사용 설명서 - 페이지 9

{카테고리_이름} Cascade CPCY4201에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Cascade CPCY4201 13 페이지. 2200w bagless vacuum cleaner

Using Your Bagless Vacuum

Before use, please ensure the electrical voltage and frequency of the circuit

corresponds to those indicated on the appliance.

Pull the power cable from the vacuum cleaner and insert it into the power plug.

The 'yellow' marker on the power cable indicates the ideal cable length. The 'red'

marker indicates the maximum power cable length.

WARNING:

Do not extend the cable beyond the red marker.

Switch the power point on.

Press the "ON/OFF" button to turn the vacuum cleaner on. It is advisable to set the

'Suction power slide" to minimum before switching the appliance on.

Adjust the "Suction power slide" to the desired level for vacuuming.

Use the different cleaning attachments to suit the surface to be cleaned.

Assembling your Vacuum Cleaner

1. Connect the hose connector to the front cover of the vacuum

cleaner by pushing it in until it clicks into place. To release the

hose connector, push the two buttons located on the top of

the connector and pull away from the vacuum.

2. Connect the extension pole to the hose connector by pushing

it into place. Use reasonable force to push it to ensure there is

a tight seal.

3. Connect the extension pole onto the cleaning accessory by

pushing it into the corresponding hole. Use reasonable force to

ensure a tight seal .