3P Technik 1000300 작동 및 조립 지침 - 페이지 4
{카테고리_이름} 3P Technik 1000300에 대한 작동 및 조립 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. 3P Technik 1000300 4 페이지. 3p patronen filter
3P Technik 1000300에 대해서도 마찬가지입니다: 설치 지침 (4 페이지)
페이지 인쇄
Maintenance advice:
Monitor the filter condition regularly. Maintenance inspections are especially useful in spring
and autumn, and after long dry periods!
When testing the sieve, examine the filter by holding up against the light and inspect for any
blocked holes in the filter mesh. As necessary clean the filter with a brush, using a little washing
up liquid to help dissolve any fatty deposits or hydrocarbon build up. You may also put the filter
insert into a dishwasher. The filter insert is made of stainless steel. With slightly inclined filters,
like the Patronen Filter, a streak of dirt may buildup which dries out after a while. The dirt then
peals away or breaks off andwith the next rain shower it is rinsed away.
Use of the Optional Backwashing Device (see below)! The filter is simply and easily cleaned
with the backwashing device. A small jet nozzle is installed below the filter sieve. In the 3P
Patronen Filter the filter cartridge rotates rapidlyduring rinsing.The strong jet of water rinses
the mesh effectively and dislodges the dirt and also the filter cartridge is typically left in an
alternate position.
Recommended Accessories:
3P Backwashing Device Patronen Filter
Guarantee:
3P Technik Filtersysteme GmbH offers this product the guarantee required by law
(from date of purchase).
Öschstraße 14
73072 Donzdorf - Germany
T +49 (0) 71 62 - 94 60 7-0
F +49 (0) 71 62 - 94 60 7-99
www.3ptechnik.com
3P Automatic Backwashing Device Patronen Filter
Backwashing Device
Profi Connection Set
Item No.1000355
consisting of:
3P Backwashing Device, Profi Connection
Set and Programmable Timing Device
Item No.1000356