cascade corporation 35K 사용자 설명서 - 페이지 16

{카테고리_이름} cascade corporation 35K에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. cascade corporation 35K 18 페이지. Integral fork positioner/ sideshifter

ERIODIC MAINTENANCE

2000-Hour

After 2000 hours of truck operation, in addition to the

100, 300 and 1000-hour maintenance, forks in use shall

be inspected at intervals of not more than 12 months

(for single shift operations) or whenever any defect or

permanent deformation is detected. Severe applications

will require more frequent inspection.

Fork inspection shall be carried out by trained personnel

to detect any damage that might impair safe use. Any fork

that is defective shall be removed from service. Reference

ANSI B56.1-2005.

Inspect for the following defects:

• Surface cracks

• Straightness of blade and shank

• Fork angle

• Difference in height of fork tips

• Positioning lock

• Wear on fork blade and shank

• Wear on fork hooks

• Legibility of marking

NOTE: Fork Safety Kit 3014162 contains wear calipers,

inspection sheets and safety poster. Also available is fork

hook & carriage wear gauge 209560 (Class II) and 209561

(Class III).

6077298-R7 EN