Dancover Bermuda HE94000 매뉴얼 - 페이지 4

{카테고리_이름} Dancover Bermuda HE94000에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dancover Bermuda HE94000 6 페이지. Infrared

Figure 1: Mounting bracket (wall

bracket) and anchor dowels provided.

Connection from the wall to the

infrared heater.

Figure 3: Tilt angle

Cleaning and Maintenance

 This appliance consists of a robust and maintenance‐free stainless steel，aluminium casing and a protection cover. No user

serviceable parts inside.

 Before cleaning， remove the plug from the power outlet and wait until the appliance is sufficiently cooled off.

 Wipe the appliance only with clean and lint‐free cloth or a soft brush.

 Never use abrasive cleaners, scrubbing brushes and chemical cleaners for cleaning!

 Can use alcohol to clean the appliance.

 To protect against electrical shock and danger of life, do not immerse cord, plug, or any part of the appliance in water or other

liquid.

 For heating element replacement ，please contact the manufacturer or its service agent or a similarly qualified person.

 any other service contact with the service agent or a suitably qualified electrician.

STORAGE

Do not route cord when heater storage, or heater is not in use.

Disposal

In accordance with European Directive 2002/96/EG concerning used electrical and electronic appliances (waste electrical

and electronic equipment – WEEE), please return any electrical equipment that you will no longer use to the collection

points provided for their disposal.

This symbol indicates that the appliance cannot be treated as normal domestic trash, but must be handed to a collection

point for recycling electric and electronic appliances.

Information concerning where the equipment can be disposed of can be obtained from your local authority.

Figure 2 Min. distance to floor,

ceiling and wall