DUJARDIN EM3520 운영 매뉴얼 - 페이지 6

{카테고리_이름} DUJARDIN EM3520에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DUJARDIN EM3520 11 페이지. M-locks basic line, electronic

OPENING OF THE LOCK

Enter the code (Manager Code set at the factory = 1-2-3-4-5-

6). If the code is correct, a double signal sounds.

Unlatch the door and open it. If the door is not opened within

3 seconds, the lock will automatically engage again.

For model EM3020: to close the lock, press any key.

1. Enter the code. After entering a right code, a double signal

sounds and the time delay starts.

During the time delay expires, the LED flashes every 10

seconds. After time delay has elapsed, a double signal sounds

and the opening window starts. During the opening window,

the LED flashes and the lock beeps, every second. To open the

lock, a valid code has to be entered again during the opening

window.

2. Enter the code again during the opening window. A double

signal sounds.

If the opening window expires without entering a valid code,

the lock is secured again with time delay.

3. Unlatch the door and open it. If the door is not opened within

3 seconds, the lock will automatically engage again.

For model EM3020: to close the lock, press any key.

If the lock is set to dual combo, one valid code starts time delay.

During the opening window, two valid codes have to be entered

to open the lock.