DANE-ELEC SO SPEAKY - 사용자 설명서 - 페이지 12

{카테고리_이름} DANE-ELEC SO SPEAKY -에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DANE-ELEC SO SPEAKY - 19 페이지. Multimedia hard disk drives
DANE-ELEC SO SPEAKY -에 대해서도 마찬가지입니다: 데이터시트 (2 페이지), 빠른 시작 매뉴얼 (2 페이지), 매뉴얼 (20 페이지), 빠른 시작 매뉴얼 (2 페이지), 사용자 설명서 (2 페이지)

페이지 인쇄

3. To connect to a television and use the VGA output: Select VGA mode, then press the VIDEO key

on the remote to switch to VGA mode.

The menu will appear on the television screen. Also connect the AV cable for sound (white and

red) since the YPbPr cable only transmits the image.

4. To connect to a VGA monitor and use the VGA output: Press the VIDEO key on the remote to

switch to VGA mode. The menu will appear on the television screen.

5.2 Use of the Memory Card

If you insert your memory card (Ex: SD, CF...) before turning on your So Speaky , the files saved

on your So Speaky's hard disk as well as those on your memory card will be displayed on the

screen.

Press

main peripheral storage device menu.

If you insert your memory card while the So Speaky is turned on, only the data stored on your

card will be displayed on your screen.

Note : Before inserting a memory card, make sure you stop the playing mode !

Comment: You will not be able to go back. To display the hard disk and the memory card again,

you will need to reboot your So Speaky.

MODE DE SORTIE VGA

to select the peripheral storage device. By pressing ENTER, you will enter into the