Danfoss 102 설치 및 사용자 지침 - 페이지 8

{카테고리_이름} Danfoss 102에 대한 설치 및 사용자 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Danfoss 102 12 페이지. Gp programmers & timeswitches for time control of domestic central heating systems
Danfoss 102에 대해서도 마찬가지입니다: 설치 및 배선 지침 (2 페이지), 사용자 지침 (2 페이지)

페이지 인쇄

Setting the time of day

The dial on the front of the 102 displays the hours of the

day using the 24hour clock.

Remove dial cover (turn

slightly to the left and

pull off)

Turn the dial clockwise

until the correct time is

aligned to the TIME

mark (as shown).

IMPORTANT: turn the dial clockwise only

Remember you will have to re-set the time after

a power-cut, and also when the clocks change

in Spring and Autumn.

Setting the programme

If not already done so, remove the dial cover (turn

slightly to the left & pull off)

Decide when you want your hot water and heating

to come on and go off. While gripping the dial knob

slide the RED tappets to the required ON times and

the BLUE tappets to the required OFF times (the

tappets may be quite stiff to move)

Note: Tappets can be moved around the dial in a clockwise

or anti-clockwise direction, as convenient.

TIME mark

(Tappets A, B, C, D)