Dukane iQ LS-E 애플리케이션 노트 - 페이지 4

{카테고리_이름} Dukane iQ LS-E에 대한 애플리케이션 노트을 온라인으로 검색하거나 PDF를 다운로드하세요. Dukane iQ LS-E 16 페이지. Ultrasonic probe system, automation interface guidelines

DUKANE

Intelligent Assembly Solutions

All System Inputs are optically isolated from the internal circuits and can be connected to sinking or sourcing PLC output

cards. The inputs will draw approximately 10mA with a 24Vdc supply. The Systems Inputs can also be configured for a

contact closure if necessary.

PLC Output Card

Contact closure or

transistor output

Notes:

1. All System Inputs share the same Isolated Common (J2-13). It is critical that the isolated common is connected

to the positive supply or ground.

2. J2-1 can be used in place of the 24Vdc supply. If so, J2-13 must be connected to J2-2.

Warning: Any connection to the Ultrasound Activation/Cycle Start Input (J2-8) or the Automation Thruster Control Input

(J2-9) should be disabled during an emergency stop condition.

AN502 (REV 07)

Page 4 of 16

Connecting System Inputs

PLC Sourcing Output Card

+24Vdc Supply

(+30Vdc max)

PLC Digital Outputs

iQ Digital Input

Sourcing Current

Sinking Current

Isolated Common

APPLICATION NOTE

iQ System Inputs

J2-13

0Vdc Return

AN502