Airvolution Esatto EUM52 사용자 설명서 - 페이지 7

{카테고리_이름} Airvolution Esatto EUM52에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Airvolution Esatto EUM52 16 페이지. Undermount rangehood 52cm ⁄ 75cm ⁄ 90cm

It's important to carefully read the following installation

instructions before beginning the installation of your oven.

Important installation safety –

Ducting options

I N S TA L L AT I O N I N S T R U C T I O N S

Always switch the power off prior to beginning the installation.

–

Stainless steel is very easily damaged during installation. Wherever possible,

protect the rangehood with the cardboard box or plastic wrap during the

installation.

–

For safety reasons, this rangehood must be earthed.

–

A power point must be located within 1.5m of the power cord exit from the

rangehood, and it should be always accessible to allow isolation from power

during cleaning or maintenance.

–

All ducting must comply with building codes and local requirements.

–

If you are re-circulating the air, rather than ducting, please ensure that the side

outlet grilles are not obstructed in any way as this will effect the effi ciency of

the rangehood.

–

Ensure that the rangehood is mounted in a level position, both horizontally

and vertically. This is essential to ensure the rangehood operates correctly and

prevents grease build up at one end.

Before beginning the installation of your rangehood, the method of ducting should be

considered and selected. The guide below illustrates the various ducting options.

Note: This rangehood can be operated in recirculation mode where required,

although we recommend to duct wherever possible.

Into your ceiling cavity and then vented through your eaves.

Straight up and through your tiled or metal roof.