3rdisecure IRIS 101 사용자 지침 - 페이지 7

{카테고리_이름} 3rdisecure IRIS 101에 대한 사용자 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. 3rdisecure IRIS 101 16 페이지.

ALARM MODE RECORDING

In Alarm mode a text message is sent to your mobile when the camera is activated by movement or

mains power loss. The text message tells you the camera name, the time of the alarm and which type

of alarm event occurred. When the camera records an alarm event, it stores 2 frames before, 4 frames

during and 2 frames after the event. This recording is automatically transmited to a secure server.

When the alarm trigger has been activated and the clip has been sent, the camera will wait for 30

seconds for there to be an absence of movement (in other words, for the scene to 'calm down') before

going back into alarm mode. This ensures that continuous movement does not trigger continuous alerts

and the sending of a large number of video clips.

To enable or disable alarm mode on an Iris

Camera:

1. Ensure the camera(s) and your mobile

handset are switched to ON.

2. Press in and hold the camera ON/Off switch

until the green LED illuminates, then release.

The green light becomes solid when the unit

is ON. The red PIR light will flash recognising

movement. The yellow light will begin to flash

then turn to a solid light once connection has

been made to the network and our server.

3. Go to Applications or Games folder on

your mobile handset. If this folder does

not exist on your mobile read your

handset user manual for advice.

4. Select IrisPlayer software.

Select one to launch:

IRIS

For setup and technical assistance please go to www.3rdisecure.tv or call 01443 819328

Launch

The following screen will appear.

IrisPlayer 1.03

5. Accept Terms and Conditions by pressing 1.

License Agreement

(1) Agree (2) Disagree

I agree to use this software in accordance

with all applicable local laws governing

privacy, data protection, digital media rights

& viewing of content.

Page 7