3S SL-R60S 운영 및 유지보수 매뉴얼 - 페이지 8
{카테고리_이름} 3S SL-R60S에 대한 운영 및 유지보수 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. 3S SL-R60S 12 페이지.
페이지 인쇄Operation
Attention!
Ensure that the safety
carabiner is fully closed and
locked.
5.1 Attach the fall arrester to the guide rail at
any position. The guide rail should have
been installed along the central line of
the ladder. (As in Fig. 5.1)
5.2 Press down the button and turn the
rotary knob clockwise to its limit, hold
the button and knob, and put the rollers
into the slot of the guide rail. (See Fig. 5.2,
Fig. 5.3 and Fig. 5.4.)
5.3 Release the button and the rotary knob
to let them return to their original
positions. (See Fig. 5.5)
5.4 The fall arrester is ready for use. (See Fig.
5.6)
5.5 Connect the carabiner to the sternal
attachment point of the full body
11
harness, and ensure the gate of the
carabiner is closed and locked. The fall
protection system is well established for
fall protection at the time.(See Fig. 5.7)
5.6 To detach the fall arrester, press down
the button and turn the rotary know
clockwise, hold the button and knob, and
detach the fall arrester off the rail. (See
Fig. 5.8)
5.7 Release the button and rotary knob to let
them return to their original positions. (As
in Fig. 5.9)
5.8 Open the the gate of the carabiner to
disconnect it from the full body harness
of the operator.
5.9 The fall arrester is integrated with anti-
reverse mechanism, which disenables
the user to turn the rotary knob if he
attempts to attach the fall arrester
upside-down, therefore making reverse
attaching impossible. (See Fig. 5.10)
Press
down
Fig. 5.1
Fig. 5.2
Fig. 5.4
Fig. 5.5
90°
90°
Fig. 5.3
Fig. 5.6
Fig. 5.7
12