Duke HDC6-37.5-240 서비스 매뉴얼 - 페이지 15

{카테고리_이름} Duke HDC6-37.5-240에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Duke HDC6-37.5-240 20 페이지. Foodservice equipment

SYMPTOM

Heating Elements do not

heat.

One Heating Element does

not heat.

Heating Elements

operating but no indication

on the Display Box.

TROUBLESHOOTING

CAUSE

Unit not plugged in

Main Power On/Off Switch not in on position

Faulty Control Board

Defective Heating Element or Hi-Limit Thermostat

Defective RTD

Defective SSR

Defective Control Board

Defective Display Board

Service Manual for Dry Channel HDC3/HDC6 Units

Plug unit in to proper power outlet.

Move the Main Power On/Off Switch to on position.

Replace Control Board.

Check resistance across Heating Element and

Hi-Limit Thermostat. It should be around 124Ω.

Replace Channel Assembly if test fails.

Check resistance across RTD at ambient room

temperature. Resistance should be approximately

1000Ω. Replace Channel Assembly if test fails.

Replace SSR.

Replace Control Board.

Replace the Display Board.

REMEDY