3S TE200 사용 설명서 - 페이지 11

{카테고리_이름} 3S TE200에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. 3S TE200 20 페이지.

3-2

Installation

3-2-2 Wall-Mounting

3-3

The I/P Converter requires a clean and dry air supply. Provide a system able to deliver such

an air supply.

① The I/P Converter can be ordered with either Rc1/4 or 1/4NPT couplings. Ensure you use

the correct couplings to match those on I/P Converter.

② Connect the piping using the appropriate procedure depending upon whether a reducing

valve (Mini-Set XR100) is fitted or not.

If a reducing valve is not fitted, connect to the SUPPLY inlet on the I/P Converter.

If a reducing valve (Mini-Set XR100) is fitted, connect to the "P1" coupling on the Mini-Set

unit.

③ Ensure you fully purge the piping before connection to prevent any particles of dirt or

foreign material from entering the system.

④ Adjust the supply pressure to deliver a 140kPa (1.4kgf/cm

turn the adjustment knob on the Mini-Set to set the pressure to 140kPa (1.4kgf/cm

) air supply. If using a Mini-Set,

3－2