DUKER 3004 사용 설명서 - 페이지 3

{카테고리_이름} DUKER 3004에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DUKER 3004 9 페이지. Gate valve with blow-off pipes and welding studs for steel pipes for gas

1. Intended Use

After the installation into a pipe system, shut-off valves are only intended for stopping or allowing media to

pass within the range of the permitted operating conditions (temperature and pressure limit "PN" labeling on

the valve, unless stated otherwise).

Gate valves are used exclusively for open/closed operation in pipe systems.

We will not assume any responsibility for consequential damage caused by



unauthorised modification of the valve and the accessories supplied



improper operating or operating conditions



acts of God

2.1 General safety instructions

The same safety regulations apply for valves as for the pipe system in which they are installed. The

following instructions only include additional safety instructions to be observed for valves.

When using this valve, the generally recognized rules of good practice (standards, DVGW regulations,

VDI guidelines or other regulations valid at the place of installation) must be observed.

The valve must be professionally installed into the pipeline.

Issue 02

Düker GmbH, www.dueker.de