Case IH MXU100 수리 매뉴얼 - 페이지 6
{카테고리_이름} Case IH MXU100에 대한 수리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Case IH MXU100 16 페이지.
페이지 인쇄SAFETY RULES
Generalities
Carefully
follow
•
maintenance procedures.
Do not wear rings, wristwatches, jewels,
•
unbuttoned or flapping clothing such as ties, torn
clothes, scarves, open jackets or shirts with open
zips which could get caught on moving parts. Use
approved safety clothing such as anti--slipping
footwear, gloves, safety goggles, helmets, etc.
Wear safety glasses with side guards when
•
cleaning parts using compressed air.
Damaged or frayed wires and chains are
•
unreliable. Do not use them for lifting or towing.
Wear suitable protection such as approved eye
•
protection, helmets, special clothing, gloves and
footwear
whenever
standing in the vicinity of the welding process
should wear approved eye protection. NEVER
LOOK AT THE WELDING ARC IF YOUR EYES
ARE NOT SUITABLY PROTECTED.
Never carry out any repair on the machine if
•
someone is sitting on the operator's seat, except
if they are qualified operators assisting in the
operation to be carried out.
Never operate the machine or use attachments
•
from a place other than sitting at the operator's
seat or at the side of the machine when operating
the fender switches.
Never carry out any operation on the machine
•
when the engine
specifically indicated. Stop the engine and
SECTION 00 - - GENERAL - - CHAPTER 1
specified
repair
and
welding.
All
persons
is running, except when
ensure that all pressure is relieved from hydraulic
circuits before removing caps, covers, valves,
etc.
All repair and maintenance operations should be
•
carried out with the greatest care and attention.
Disconnect the batteries and label all controls to
•
warn that the tractor is being serviced. Block the
machine and all equipment which should be
raised.
Never check or fill fuel tanks or batteries, nor use
•
starting liquid if you are smoking or near open
flames as such fluids are flammable.
The fuel filling gun should always remain in
•
contact with the filler neck. Maintain this contact
until the fuel stops flowing into the tank to avoid
possible sparks due to static electricity build--up.
To transfer a failed tractor, use a trailer or a low
•
loading platform trolley if available.
To load and unload the machine from the
•
transportation means, select a flat area providing
a firm support to the trailer or truck wheels. Firmly
tie the machine to the truck or trailer platform and
block wheels as required by the transporter.
Always use lifting equipment of appropriate
•
capacity to lift or move heavy components.
Chains should always be safely fastened.
•
Ensure that fastening device is strong enough to
hold the load foreseen. No persons should stand
near the fastening point.
The working area should be always kept CLEAN
•
and DRY. Immediately clean any spillage of
water or oil.
Never use gasoline, diesel oil or other flammable
•
liquids as cleaning agents. Use non--flammable
non--toxic proprietary solvents.
Do not pile up grease or oil soaked rags, as they
•
constitute a great fire hazard. Always place them
into a metal container.
5