Dulytek DHP5 Series 사용 설명서 - 페이지 9

{카테고리_이름} Dulytek DHP5 Series에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dulytek DHP5 Series 15 페이지.

INSTRUCTION MANUAL: DHP5

OPERATING INSTRUCTIONS (continued)

STARTING

PRESS

SETTING

CONTROL

PANEL

Dulytek Equipment

www.dulytek.com

1. Flip the ON / OFF switch

the power switch both become lit.

The control panel

Fahrenheit or Celsius preferences. Please follow the steps below to record the

desired settings:

1. Press Set button on the control panel (Fig. 1) to go to the temperature

setting mode for the top platen.

2. Press Up or Down buttons to select the desired temperature (Fig.

2). The selected temperature is shown on the upper line of the display.

Tip: Enter the temperature either in °F or °C; you will be able to select the

temperature scale later.

3. Press Set button again (Fig. 3) to go to the temperature setting mode

for the bottom platen.

Fig. 1

4. Press Up or Down buttons to select the desired temperature (Fig.

4). The selected temperature is shown on the lower line of the display.

5. Press Set button again (Fig. 5) to go to the timer setting mode.

6. Press Up

or Down

(Fig. 6).

7. Press Set button to go to the temperature scale selection mode (Fig. 7).

Tip: Depending on your machine's default settings, you may either see "F"

or "C" on the display indicating the currently selected temperature scale (°F

or °C).

8. Press Up or Down buttons to select either °F or °C (Fig. 8) OR skip

this step if you are satisfied with the current selection.

to turn the press on. The control panel

is used to set temperature for the platens, timer, and

Fig. 2

buttons to select the desired time in seconds

Fig. 3

PAGE 8

and

Fig. 4