Danfoss VLT series 설치 매뉴얼 - 페이지 4
{카테고리_이름} Danfoss VLT series에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Danfoss VLT series 6 페이지. Frequency converters - safe torque off
Danfoss VLT series에 대해서도 마찬가지입니다: 사용 설명서 (16 페이지)
페이지 인쇄
Installation Guide | VLT® 24 V DC Supply MCB 107
Procedure
1. Disconnect power to the drive.
2. Disconnect power to the live part connections on the relay terminals.
3. Remove the LCP or the blind cover.
4. Remove the terminal cover.
5. Remove the control cables.
6. Remove the cable decoupling plate.
For enclosure sizes A2 and A3, also remove the plastic cover underneath the decoupling plate (if installed).
7. Insert the option in the D-option slot.
8. Mount the cable decoupling plate.
9. Connect the control cables and relieve the cables with the enclosed cable strips.
10. Attach the terminal cover and the LCP, or the blind cover.
11. Connect power to the drive.
Example:
1 LCP
3 Cable decoupling plate
5 D-option slot
Illustration 2:
Installing a D-Option in an A2/A3 Enclosure
4 | Danfoss A/S © 2018.11
5
4
3
Scope of Delivery, Safety, and Installation
1
2
2 Terminal cover
4 D-option
AN287957936346en-000101 / 130R0308